Ron Mauer
15214 East Fremont Dr.
Centennial, CO 80112

Phone: 303-790-2333
Fax: 303-799-1299
Cell: 303-880-7895
rmauer@brockeasley.com

John Misegadis
15214 East Fremont Dr.
Centennial, CO 80112

Phone: 303-790-2333
Fax: 303-799-1299
Cell: 303-263-0228
jmisegadis@brockeasley.com

Bill VandeVoort
15214 East Fremont Dr.
Centennial, CO 80112

Phone: 303-790-2333
Fax: 303-799-1299
Cell: 303-880-9402

wvandevoort@brockeasley.com

• Anderson Greenwood
Rupture disks, holders and explosion vents, explosion isolation and suppression systems.

• Crosby
Safety relief valves for Section I and Section VIII service.

• Biffi Actuators
Pneumatic, hydraulic, direct gas, and electric high and low pressure actuators.

• Dräger
Draeger Safety: Combustible and toxic gas detection systems.

• Fike
Safety relief and safety selector valves, tank blanketing regulators. Instrument valves, manifolds, and gauge valves.

• Fike oilfield tool products: Pressure Activation Devices (PAD) and Hydraulic Tubing Drain (HTD) rupture disks

• Flowserve

VALTEK - control products for severe services: cryogenic, superheated steam, volatile and corrosive fluids, erosion, high pressure drops, vibration, cavitation, flashing, and high noise levels. Valtek valves are equipped with spring cylinder or spring diaphragm actuators and provide the thrust and speed necessary to manage any service. Valtek four way analog and digital positioners provide accuracy and response to handle the most exacting applications. www.flowserve.com

KAMMER - designed to handle a wide range of service conditions: pressures from vacuum to 4000 bar and temperatures from minus 269 degrees C to plus 400 degrees C. Body materials include all common stainless steels, in addition to plastics and exotic alloys. Kammer also specializes in applications that require zero stem leakage, bellows sealed valves, designed for zero leakage and maximum cycle life. When equipped with bellows seals, Kammer valves reliably eliminate the threat of fugitive emissions or toxic/corrosive leakage.

• Extreme low flow valves - Cv of 0.000001
• Zero stem leakage - bellow seal
• Plastic valves
• Tank bottom valves
• Cool Alloys

NAF - valves for the process industry. Intelligent flow control systems.

• Valves - Ball, Butterfly, Knife Gate, Ball sector, Globe, Gate, Check, Safety
• Actuators
• Valve Controllers
• Hand Levers
• Software
• Switches

SCHMIDT ARMATUREN - control valves and pneumatic actuators. FlowTop and FlowPro SIL 3/4 modular design control valves, self acting regulators, desuperheater and pneumatic actuators. Economical and shortest delivery times.

LOGIX - digital products for control valves in process control. StarPac Intelligent Control system. All positioning and control products utilize Modbus, Foundation Fieldbus and HART protocols.

• Easiest commissioning among all digital positioners
• Fast, reliable communications
• Local status LED's
• Diagnostics
• Low air consumption
• Two stage control

• Jayco: Vent valves, thief hatches - minimizing the escape of light ends of crude in lease storage tanks by maintaining a pressure on the tank.

• Morin Actuators
Pneumatic and hydraulic actuators. Ductile iron/stainless and all stainless scotch yoke design.

• Parker Hannifin
Single and multi-tube bundles, insulated and heat traced tubing.

• SOR: Pressure transmitters; pressure, vacuum and temperature switches, liquid level and flow switches.

• Valve Repair Consultants, LLC
National board certified Section I and Section VIII relief valve repair. Control and manual valve repair.

• Anderson Greenwood/Crosby stocking distributor and factory authorized assembler.

• Automated valve services and assemblies.

• VAREC
Tank protection products. Pressure and vacuum relief valves, vents, flame arrestors, detonation flame arrestors, hatches and manway covers. (Only represented in New Mexico)